Add a Log

You can add a new log to the top or bottom of an opening in a log wall. The log can be full-height or undersized. Use the function in the model or in the log wall elevation.

1. Select Log Walls > Add Log.
2. If you are using the function in the model, select the wall with the cursor. If you are using the function in the log wall elevation, move to stage 4. The color of the selected wall changes. You can undo the selection by clicking a different wall.
3. Select Confirm.
4. Enter the log height in the text window. As a default, the text field contains the full height of the log profile. If you want to add a log with an undersized profile, do one of the following:
   • Enter a negative value in the text field, if you wish to add the lower part of a log profile, for example a log above another log (A).

     

   • Enter a positive value in the text field, if you wish to add the top part of a log profile, for example a log below another log (B).

     

5. Select the locating point in one of the following ways:
   • Select one of the nine points on a rectangle drawn around the cross section as the locating point from the auxiliary menu.

     

   • Select the Select Locating Point function from the auxiliary menu, and select any point on the cross section as the locating point. If required, you can change the locating point to one of the nine quick-selection points, and then activate the selected locating point again by selecting the Free Locating Point function.
6. Select the profile's first point.
7. Select the profile's second point.

Note

• You can also select the function from the context-sensitive menu of the elevation drawing.
• Open the log wall elevation with the Edit Log Wall Shape function.
• You can also add logs to the elevation by using the general Copy command in the context-sensitive menu.
• You can delete a log with the Delete Log function.

Edit Log Wall Shape
Delete a Log
Copy an Object within a Drawing/Model
Add a Profile
Log Walls